Calibration Gas Set for Hydrogen Sulphide
- Calibration Gas Set for Hydrogen Sulphide (H2S-1/H2S-2) is designed for generating calibration gas easily for H2S detection monitors or H2S detector tube.
- International fitting yoke (for a scuba cylinder)
- Generate calibaration gas using H2S generation tube, Air pump, calibration bag contained in the kit.
- You can confirm the concentration of generated calibration gas with the H2S detector tube contained in the kit.
■ Composition of H2S-1
- Tube No. 296HA H2S generation tube
- Tube No. 296KY H2S absorbent tube
- Detector tube No.120SB for Hydrogen sulphide
- Air pump
- Calibration bag
- Silicon tube
- Tip cutter
- Bottle for generating water
- Bottle for waste
- Tube cock
Generation tubes, absorbent tubes and detector tubes are for one-time use.
■ Composition of H2S-2
- Model H2S-1 Calibration gas set
- Model AP-20 gas aspirating pump kit
■ Compressed breathing air test tubes
||Approx. 0.5-2.0 L/min
||Absorbing reagent absorbs water and acid is generated, then the acid reacts on celecium sulphide is produced.